Get a great start to your front splitter with this mount that tucks under your factory crash bar, Or the Boosted Fab Track Bar with Absolutely no modification to the chassis!
Quick Release Add On Kit (CLICK HERE)
Splitter Under Mount Support Plates (CLICK HERE)
Titanium Wear Pucks (CLICK HERE)
Splitter Winglets (CLICK HERE
Made from powder coated steel upper that is included in all variations and keyed powder coated lower section (except with the PA quick release system) with an Aluminum middle section this front splitter will give you plenty of adjustment. It will adjust from a stock bumper height all the way down to only 3.5 inches from the ground on a non lowered car. On our fitment car that has been mildly lowered in it's full lowered position it was a mere 2.25 inches from the floor. Plenty of adjustment for 99% of the cars and lips out there.
Upper and modified middle section that work with Professional Awesome quick release are also an option. The splitter with the right support rods can be dropped to the floor by accessing four m8 bolts through the grill and dropped down and slid under the factory bumper. Powder coat will be black unless "custom color option" is added to the cart.
Please note that factory A/C will not fit with any of these kits and it either needs deleted or custom lines and/or evaporator will be needed.
A little more detail:
Regular Mid Section: This is the system as shown on the yellow car in the pics. It will have a nipple on the aluminum middle section allowing easy attachment of a front splitter support rod. This will require cutting or removal of the front grill. If running a large (8" plus of stick out) splitter or crushing down the track at high speeds this option is recommended. (Splitter Support Rods/Cables Not Included)
No Nipple: Not interested in hacking up your front grill? This one removes the nipple for the stealthy under grill attachment. No front splitter rod attachment hole on this one means your not going large with the splitter and/or racing it. Bottom support plates are suggested for added insurance. (Not Comparable With Splitter Support Rods/Cables)
Professional Awesome ready middle section: This has no bottom mount from BF, just a middle that adapts to the PA lower section you can purchase from their website. Purchase the smallest one if going this route. This is for the hardcore looking to pull a single cable and drop their splitter for service or to load on a trailer at the track. We do sell support plates for under splitter load disbursement and it will come with a nipple for a front support rod. (Splitter Support Rods/Cables Not Included)
Quick Release Add On Kit (CLICK HERE)
Splitter Under Mount Support Plates (CLICK HERE)
Titanium Wear Pucks (CLICK HERE)
Splitter Winglets (CLICK HERE)
Paper template for use with the regular mid section kits but will also work with pro awesome kits if using our splitter under mount reinforcements.
Simply use the under mount on the template to get the correct spacing transferred to the template.
Template is folded.